Hello All!
I'm very new to the GQ-4X and programming chips in general, but I have a decent background in mechanical and basic electrical engineering. I've been trying to program a new MX25L6445E chip from DigiKey using the GQ-4X, SOP16-DIP8 adapter, and the code from a MX25L6405 chip that came out of a VIZIO E371VL LCD HDTV with a cracked screen.
The problem comes when I try to write to the new chip; The progress bar reads, "Writing...(0%)" even after an hour of letting it "work."
Reading the old chip seems to work fine. I saved that info as a .bin file to my laptop, and load it before the write.
The new chip passed the blank check before attempting to write to it.
I may have comitted a big no-no, but I got tired of waiting to see the 1% show up and cancelled the write. When I read the chip it showed the first 60 or 70 lines were written, and all FF after that. Could it just really take this long? It's my first try, so I have no idea how long it should take.
Any help or advice is greatly appreciated, and I'll do my best to reply promptly.
Thanks,
Cooper
|
Writing stuck at 0%, GQ-4X, MX25L6405
Forum Locked
Posted - 07/14/2012 : 16:11:26
