MCUmall EPROM BIOS Chip Burner Forum - How to connect this 16bit adapter?

Active Users: / Visits Today:
Highest Active Users:

MCUmall EPROM BIOS Chip Burner Forum

All Forums

Novice Place

How to connect this 16bit adapter?

Forum Locked

Author

Topic

jensmaa

Germany
9 Posts

Posted - 12/17/2012 : 11:13:16

Hey there,

I bought an 16bit adapter but I'm not sure how to cennect it to my willem. Maybe you guys have a clue:

Below U3 are the pins which are locked into the ZIF socket.

h**p://www.jensma.de/upload/files/XQDQS8Ew__DSC_0457.jpg

This is the adapter:

h**p://www.jensma.de/upload/files/scriptY2G7pqP__DSC_0466.jpg

This is the connector where the adapter is connected to the willem with a cable:

h**p://www.jensma.de/upload/files/o0hmVSHf__DSC_0458.jpg

The backsite of the adapter:

h**p://www.jensma.de/upload/files/SldSZKIX__DSC_0469.jpg

These are the pins where the cable of the adapter will be connected to. I have no clue which way it should go in:

h**p://www.jensma.de/upload/files/PTl1QSAq__DSC_0465.jpg

I made a quick diagram:

h**p://www.jensma.de/upload/files/2wl52SMg__untitled.PNG

PS: Does anybody know what this "J2"-Jumper on the adapter is for?

Any help is much appreciated ;)

Reply #1

ZLM