Author |
Topic  |
|
K0PFX

USA
1 Posts |
Posted - 02/26/2014 : 08:24:58
|
Is there a way to display the hex data? I can "read" the data into a buffer and now I want to display it so I can "see" the hex data info. I have an old UNIPRO programmer which allows me to do this, but do not find command for this GQ-4X that will do the same. Thanks Mel |
|
Reply #1
ZLM
    
2947 Posts |
Posted - 02/28/2014 : 19:38:38
|
click on Code tab:
 48.34 KB |
 |
|
Reply #2
briank9803
 
USA
11 Posts |
Posted - 05/02/2014 : 18:17:20
|
quote: Originally posted by ZLM
click on Code tab:
 48.34 KB
When I do this with ver 6.29, only FF are displayed. I'm trying to read from a KNOWN good PROM and software says it Reads values but only displays FF. In fact, software says it reads WITHOUT ANY CHIP in the GQ-4X programmer. Obviously, software is not reading properly. Why? |
____________ Brian |
 |
|
Reply #3
ZLM
    
2947 Posts |
Posted - 05/07/2014 : 10:01:48
|
Software does not check the chip. So, it read the empty ZIF. |
 |
|
Reply #4
laoniu

3 Posts |
Posted - 05/17/2014 : 02:28:51
|
I have an old UNIPRO programmer which allows me to do this
______________________
|
 |
|
|
Topic  |
|