MCUmall EPROM BIOS Chip Burner Forum - DebugWIRE ICE+AVRISP MKII & Atmega8 problem

Active Users: / Visits Today:
Highest Active Users:

MCUmall EPROM BIOS Chip Burner Forum

Username:	Password:
Save Password
Forgot your Password?

All Forums

MCUmall Forums

Using the AVR JTAG ICE and AVRISP ISP programmer

DebugWIRE ICE+AVRISP MKII & Atmega8 problem

Forum Locked

Printer Friendly

Author

Topic

Anatoli Panchenko

Israel
3 Posts

Posted - 11/16/2007 : 10:39:13

Hi,
I have PRG-026 USB AVR DebugWIRE ICE+AVRISP MKII. AVR Studio detecting it as JTAGICE MkII, and don`t allowing me to select
Atmega8 from dropdown meniu (I don`t see Atmega8 here). Itryed to flash programmer from DebugWIRE+JTAG MKII ISP programmer\update_Firmware folder, but problem is still.
Any help or ideas are welcome.

Reply #1

ZLM

2945 Posts

Posted - 11/19/2007 : 09:17:10

I will try today later.

Reply #2

Anatoli Panchenko

Israel
3 Posts

Posted - 11/22/2007 : 11:42:08

Hi ZLM,
At Atmel.com I saw that JTAG can`t to program mega8. But in MCUmall description of AVR DebugWIRE ICE+AVRISP MKII (actually it shold to be DebugWIRE ICE+JTAG MK2) was writed that it yes can do it...

Reply #3

ZLM

2945 Posts

Posted - 11/22/2007 : 14:38:44

Tried on Atmega8. It is not in the device list.
HoweverI succefully programmed it by select Atmega88.

But the fuse bit name you need to check the datasheet to do a conversion.

The description is revised.

Reply #4

Anatoli Panchenko

Israel
3 Posts

Posted - 11/24/2007 : 22:54:07

Thank you for help ZLM. Yes, it seems to be that M8 can be programed as M88 . I`m not tested it for eprom read/write, but flash read/write is working good.

Edited by - Anatoli Panchenko on 11/27/2007 23:42:38

Topic

Forum Locked

Printer Friendly

Jump To:

MCUmall EPROM BIOS Chip Burner Forum

Generated in 0.06 sec.

Snitz Forums 2000