| Author |
 Topic  |
|
|
Seer
2 Posts |
 Posted - 09/05/2019 : 04:38:54
|
I have seen a few posts about this burner but i have tried several things and cannot get the burner to do a blank check it fails.
I am able to read the original chip but when I try to burn it this comes up: Write Failed, Address=0x000001, Buffer=0xFD Device=0x1C
This is the same error when trying to verify it is blank as well.
The last burner I used was 20 years ago and called a Gangpro 8 but this seemed to be a good way to program 42 pin eproms |
|
| Reply #1
anniel
2596 Posts |
Posted - 09/05/2019 : 13:40:19
|
quote:
Originally posted by Seer
I have seen a few posts about this burner but i have tried several things and cannot get the burner to do a blank check it fails.
I am able to read the original chip but when I try to burn it this comes up: Write Failed, Address=0x000001, Buffer=0xFD Device=0x1C
This is the same error when trying to verify it is blank as well.
The last burner I used was 20 years ago and called a Gangpro 8 but this seemed to be a good way to program 42 pin eproms
Are you certain your device is blank? |
 |
|
| Reply #2
Seer
2 Posts |
Posted - 09/06/2019 : 13:41:42
|
| Yes I ran 4 of them through the eraser |
|
|
| Reply #3
anniel
2596 Posts |
Posted - 09/06/2019 : 14:19:39
|
quote:
Originally posted by Seer
Yes I ran 4 of them through the eraser
Are you certain they are good? |
|
|
| |
Topic |
|
GQ 4x4 Help
Forum Locked
