MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 PIC Programmer
 Zif socket adapter		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Aurbo

1 Posts
Posted - 04/10/2008 :  15:05:08  Show Profile
I purchased one of your Enhanced JDM units similar to this:

http://cgi.ebay.com/Enhanced-JDM-PIC-programmer-4-Microchip-12F629-New-V2_W0QQitemZ310040238073QQihZ021QQcategoryZ1504QQrdZ1QQssPageNameZWD4VQQcmdZViewItem?_trksid=p1638.m124

This unit has the 3 sockets in two rows with silk screened indicators for proper chip placement.

What ZIF socket should I buy? and will the single ZIF socket allow me to program all the various chips supported? or will I have to remove it and insert the chip in the old sockets again depending on pin count?
Reply #1

ZLM

2945 Posts
Posted - 04/10/2008 :  18:44:34  Show Profile
The V2 version JDM is not designed to solder a ZIF socket. If you replace the DIP by a 40 pin ZIF, then only 40 pin chips are able to be programmed.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000