quote:

---

Originally posted by scrappysphinx

Hi all, i have some of the flash chips that i need to erase and program. I have 5 with the 29F400 chip and 5 with 29F800 in tsop48 package. The end goal is for them to be used as Kickstart chips in the amiga, which usually uses the 27C400 eprom however i don't know what adapter i need to erase and program them. I have seen there is a tsop adapter but that would mean i would need to desolder the tsop each time i needed to program them. I have found a few articles explaining how to program them with the TL866 programmer but hoping someone can advise me on how i can use them with the GQ4X4 i have?

Here is the info on how to program them with the TL866 if that helps

https://shred.zone/cilla/page/467/flash-amiga-rom.html?fbclid=IwAR2hWWa0sDh7urZO_YvMAlj-6dvfEh1FQ1CubkDigFu7Z7oCFtWgo-2oLww

Google Drive link for pic cause attachments don't seem to be working.

https://drive.google.com/file/d/1LW5kEjy329ou3Jx73hG1-7Dt7VFAnK8f/view?usp=sharing

---