MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 What adapters I needed on Willem programmer?		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

ZLM

2945 Posts
Posted - 08/30/2005 :  10:27:55  Show Profile
I'll work on following chips, what adapters I needed on a Dual Powered Willem programmer?

DiL 24/28/32 pin, PLCC 32 pin. PLCC 44 pin. Psop 44 pin
Reply #1

usb

138 Posts
Posted - 08/30/2005 :  10:29:53  Show Profile
For the most DIL 24/28/32 pin EPROM/Flash/EEPROM chips you do not need adapter.

For the PLCC32 chip you need a PLCC32-DIP32 or PLCC32 HUB/FW adapter depend on your chip type. (The Enhanced willem programmer has build in PLCC32 and HUB/FW adaper on board)

For the PLCC44, if your device is 16 bit EPROM, then you need a 16 bit EPROM adapter with PLCC44 adapter. OR if your chip is Atmel MCU PLCC44, then you need a MCS-51 adapter with a PLCC44 adapter.

Currently no PSOP44 ping adapter available in MCUmall.
Go to Top of Page
Reply #2

Bianconi2

Brazil
12 Posts
Posted - 01/17/2006 :  21:37:19  Show Profile
BUT SOME ADAPTER PSOP 44, EXISTS THAT IT FUNCTIONS IN THE ENHANCED WILLEM PROGRAMMER ???? PLEASE.
THANK YOU
HERBER BIANCONI
BRAZIL
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000