MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 chip location in programmer		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

84sslt1

USA
13 Posts
Posted - 11/16/2008 :  20:37:16  Show Profile
Whats the proper way? Dip in chip at opposite end from dip switches? Extra slots in programmer socket at dip switch end or other end? Which end is up? SST 27sf512
Reply #1

ZLM

2945 Posts
Posted - 11/18/2008 :  17:14:23  Show Profile
Assume you have a standard Dual Power Willem programmer.

=============================
Steps to burn a SST512 eprom
=============================

Open the 0.97ja software and choose the SST512 chip:

h**p://www.mcumall.com/forum/uploaded/zlm/2008111818161_27SF512.jpg


Setup the screen to match this:



Place the chip in the ZIF socket as pictured on that screen. The half-moon in the chip should face toward the top, towards the ZIF lever.



Then set the jumpers like below in yellow and erase the SST chip.


www.mcumall.com/forum/uploaded/zlm/20081118183845_27SF512C.jpg

Then choose the file you want to burn, and hit the burn button.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000