MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 program the EPROM AM29LV160		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

claudiochip

4 Posts
Posted - 06/02/2009 :  07:23:11  Show Profile
please I am Brazilian and I need to read and program the EPROM AM29LV160MB-90EI and I am not getting the programmer willem 4.5 .. thanks for helping ..
Edited by - claudiochip on 06/05/2009 09:45:55
Reply #1

claudiochip

4 Posts
Posted - 06/02/2009 :  07:43:36  Show Profile
quote:
Originally posted by claudiochip

please I am Brazilian and I need to read and program the EPROM AM29LV160 and I am not getting the programmer willem 4.5 .. thanks for helping ..

Image Insert:

37.42 KB


Image Insert:

22.06 KB

Image Insert:

18.57 KB
Go to Top of Page
Reply #2

ZLM

2945 Posts
Posted - 06/04/2009 :  15:47:05  Show Profile
The programmer and the adapter are able to read the 29LV160.

But you need to config the programmer, adapter jumpers correctly, also the address wires need to be connected too.

Always check the chip ID first, this will let you know if the basic connection or pin contacting are good.
Go to Top of Page
Reply #3

claudiochip

4 Posts
Posted - 06/05/2009 :  09:42:17  Show Profile
Please ZLM, you could post how you set up ... Because I already did everything .... Thanks for the help (AM29LV160MB-90EI)
Edited by - claudiochip on 06/05/2009 09:46:53
Go to Top of Page
Reply #4

ZLM

2945 Posts
Posted - 06/05/2009 :  20:57:01  Show Profile
1. jumpers on adapter should set to 29FXX, 3.6V.
2. the address wires need to be connected between adapter and the programmer.
3. software using 0.97ja, device "29LV160 under 16 bit menu" should be selected.


Image Insert:

42.27 KB
Go to Top of Page
Reply #5

claudiochip

4 Posts
Posted - 06/06/2009 :  08:50:10  Show Profile
Zlm thank you for your help, but I am not getting, is the programmer supports mirror bit EPROM with technology? That is the case with AM29LV160MB-90EI ...
Go to Top of Page
Reply #6

ZLM

2945 Posts
Posted - 06/07/2009 :  09:45:35  Show Profile
Not sure what is the "mirror bit EPROM". But this programmer should work on this chip if the programmer is in working condition.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000