MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Help On Using TOP2005 Programmer		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

tech34

USA
3 Posts
Posted - 09/01/2006 :  20:22:22  Show Profile
I have never used eprom programmer before. So I am not familiar how to use it. Is there any kind of tutorials available to help me gain some understanding on how to use it? If so where can i get it.
I was also told that by using a good programed eprom I could make copies of it by using that information and coppying it to a blank eprom. What steps would i need to take to using an existing eprom to make copies?
Any step by step information that can help me program eprom,eeprom, flash and ect.. is more than welcome. I could use all the help available. Thanks



Mario Pena

Mario Pena
Reply #1

BlueSky

14 Posts
Posted - 09/04/2006 :  03:44:59  Show Profile
The main step for all chips should be:

1. Connect the progammer to PC.
2. Run the TopWinEn.exe application, and load the data file if needed.
3. Select device.
4. Place the chip in ZIF pf programmer.
5. Read/Write the chip.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000