MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 AM28F020/scriptDP-21		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

SCS

USA
6 Posts
Posted - 05/29/2011 :  14:34:16  Show Profile  Reply with Quote
Can read fine verify read erase and verify but when I go to wright it stops at 25% with this eror Write failed, Address=0x010001, Buffer=0xB2 Device=0xF2 help thanks
Radioman
Reply #1

ZLM

2945 Posts
Posted - 06/01/2011 :  00:04:11  Show Profile  Reply with Quote
It seems the A16 pin is not connected well. Check you chip A16 pin if connected good with adapter/programmer.
Go to Top of Page
Reply #2

SCS

USA
6 Posts
Posted - 04/05/2012 :  13:14:27  Show Profile  Reply with Quote
A16 pin can't be a problem with 6 different roms
Radioman
Go to Top of Page
Reply #3

SCS

USA
6 Posts
Posted - 04/06/2012 :  15:14:24  Show Profile  Reply with Quote
I really would like to figure this out trying again and I'm getting write fail address=0x010000,buffer=0x05DEvice=0xFD on the chips
Radioman
Go to Top of Page
Reply #4

ZLM

2945 Posts
Posted - 04/08/2012 :  20:52:02  Show Profile  Reply with Quote
If you can confirm the chips OK, then check programmer A16 pin voltage during the reading.

It should have voltage change during the reading.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000