MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 load more .HEX files		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Jerry

Czech Republic
2 Posts
Posted - 02/22/2012 :  07:03:33  Show Profile  Reply with Quote
GQ-4X with soft Rev. 6.14c

If I load the .HEX file, then the rest of bufer is filed by "00". But the right value for this is "FF".
If I load the second file, placed in the rest of bufer, then the first part of bufer is owerwrited by "00".
It means: I am not able load to bufer more .HEX files. With another programer (Elnec) is this not problem.
Jerry
Reply #1

ZLM

2945 Posts
Posted - 02/23/2012 :  00:22:15  Show Profile  Reply with Quote
If you want to combine two files, then you need to use File->Combine Files to Buffer.

This will combine multiple .bin file into the buffer.

If your files are in .hex, then you need to save your files into .bin first.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.1 sec. Snitz Forums 2000