Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home
|
Profile
|
Register
|
Active Topics
|
Members
|
Search
|
FAQ
Username:
Password:
Save Password
Forgot your Password?
All Forums
MCUmall Forums
Automobile engine ECU, Immo, Air bag chip tunning
verify M93C56
Forum Locked
Printer Friendly
Author
Topic
ricampr
Portugal
21 Posts
Posted - 04/30/2010 : 12:49:47
Hello.
I have an eprom M93C56.
read ok
write ok
verify failed
which may be the problem?
thanks
Reply #1
ZLM
2945 Posts
Posted - 05/06/2010 : 16:21:45
What adapter you used?
Check pin contact.
Reply #2
brchip
Brazil
23 Posts
Posted - 06/26/2010 : 16:48:24
I'm having the same problem. I'm using 3M soic8 clip. I used this clip for other chips and it worked fine.
Please help.
Reply #3
brchip
Brazil
23 Posts
Posted - 06/26/2010 : 16:56:49
Same here. I'm usng 3M clip with sw v4.01. Should I upgrade to the latest sw?
I tried different speeds and devices (8 and 16 bits) but no luck.
Any ideas?
Reply #4
ZLM
2945 Posts
Posted - 06/26/2010 : 21:33:23
Are you doing it while the chip on the PCB?
Reply #5
brchip
Brazil
23 Posts
Posted - 06/27/2010 : 04:40:09
Tried both ways. Reads and writes but verifiy gives error.
I tried 8 bit and 16. Is there a way to know which is the correct?
Reply #6
ZLM
2945 Posts
Posted - 06/27/2010 : 06:32:34
I recommend you to remove the chip from PCB and put it in the adapter to read and write.
That way is the standard programming way.
Reply #7
brchip
Brazil
23 Posts
Posted - 06/27/2010 : 16:39:21
I already did, but it always gives an error in the verification.
Reply #8
ZLM
2945 Posts
Posted - 07/01/2010 : 09:50:01
use slower speed.
See:
www.youtube.com/watch?v=ibd910i48CE
Topic
Forum Locked
Printer Friendly
Jump To:
Select Forum
MCUmall Forums
General Discuss
Novice Place
True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
GQ-5X
Automobile engine ECU, Immo, Air bag chip tunning
Using The Enhanced/Dual power Willem Programmer
Wellon/WEILEI USB Programmer
TOP USB Programmer
EasyPRO/SmartPRO USB Programmer
PIC Programmer
Using the AVR JTAG ICE and AVRISP ISP programmer
--------------------
Home
Active Topics
Frequently Asked Questions
Member Information
Search Page
MCUmall EPROM BIOS Chip Burner Forum
© Copyright 2003 - 2009 Mcumall Electronics Inc.
Generated in 0.07 sec.
Snitz Forums 2000