MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Automobile engine ECU, Immo, Air bag chip tunning
 93lc66a		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

RedPat

Canada
8 Posts
Posted - 09/03/2010 :  05:26:17  Show Profile
Hi,
I need some help to read this eeprom. Every time I read it, he never give me the same result.
The first time I have plug it to my gq4x, I plug it as a normal chip. But now I know is an reversed pin. Is you think I have "burned" the chip?
I want to know wich pin to plug and where. If someone can help, it will greately apreciated.
Thank you!
RedPat
Reply #1

ZLM

2945 Posts
Posted - 09/03/2010 :  07:08:04  Show Profile
The software indicated how to place the chip on the programmer ZIF.
There is a pin one marking(dot) on the chip and it should face to left-top.

also, clean up the pin and use a slow speed.

Image Insert:

3.16 KB
Go to Top of Page
Reply #2

RedPat

Canada
8 Posts
Posted - 09/03/2010 :  07:31:08  Show Profile
Allo!
I have the 93lc66A version. surface mount



Image Insert:

11.41 KB


Is I have to switch the pin?

pin1 to pin3
pin2 to 4
ect...

For now, I'm shorting my wire.

Thank you
Edited by - RedPat on 09/03/2010 07:43:29
Go to Top of Page
Reply #3

RedPat

Canada
8 Posts
Posted - 09/03/2010 :  08:52:26  Show Profile
HI!
Resolved!!!!
No need to reverse pinout!
Good bin now!
Go to Top of Page
Reply #4

cklair

3 Posts
Posted - 11/13/2010 :  06:05:20  Show Profile
i have same problem reading rl66(93c66) i cant read it in circut i took it out read it now i try to write back it wont when i varyfy it fails i tried anther chip same part number read it out but will fail varify i have tried reading it 8 and 16 bit none work
Go to Top of Page
Reply #5

ZLM

2945 Posts
Posted - 11/13/2010 :  21:37:49  Show Profile
Use lower speed and try to read and write again.

Make sure the pin 1 orientation and pin contacting are no problem.
Go to Top of Page
Reply #6

cklair

3 Posts
Posted - 11/14/2010 :  14:57:39  Show Profile
i tried reading it out side ,try to put in cleared file then again wont veryfy.then my frien tried with xprog m every thing went ok. i think something wrong with gx4 programmer it happend twice.low speed didnot help.cool thing in xprog m it will tell you if connectin n one or more pins are not esteblesh properly .this featur is missing in mcu mall programers.
Go to Top of Page
Reply #7

PierreTheron

South Africa
2 Posts
Posted - 04/10/2011 :  08:37:33  Show Profile
Hi

Also have this problem with ST93c66 eeprom microwire.

GQ-4x never does a good read or write on these.
i use other programmer to read and write to this chip.

Can this issue be adressed with the next update please?

Thanks

Pierre
Wild thing
Go to Top of Page
Reply #8

ZLM

2945 Posts
Posted - 04/10/2011 :  18:44:23  Show Profile
Try Re6.12 sodtware. It fixes 93C66 bug.
http://www.mcumall.com/download/TrueUSBWillem/GQUSBPrgRe6.12.exe
Go to Top of Page
Reply #9

PierreTheron

South Africa
2 Posts
Posted - 04/25/2011 :  21:19:17  Show Profile
Hi
Zlm I will test it and report back..
Wild thing
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000