MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 blank check, does it matter?		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

xefned

USA
2 Posts
Posted - 05/21/2017 :  04:23:52  Show Profile
Hi, I'm a novice to using the GQ-4X v4, although I've used a Genius G540 for several years.

I'm burning 3 M27C160's for a friend. The first one I burned without performing a blank check.

One the 2nd chip, I clicked 'blank check' first and it failed. I proceeded to write the chip and verify it.

Is it still OK if the chip verified correctly? I'm assuming the GQ-4X writes over any non-blank sectors. But it will likely be months before my friend installs these chips.

What do you think? Will they work?
Matthew Jenkins
Reply #1

anniel

2562 Posts
Posted - 05/21/2017 :  06:11:24  Show Profile
If the device is not blank and the verify is ok, its because the chip already contained the same data at least partially. You just re-burned the same bits like a double write.
Go to Top of Page
Reply #2

supervizeur

462 Posts
Posted - 05/29/2017 :  05:57:16  Show Profile
You nevertheless should erase the chips before burning them.
Go to Top of Page
Reply #3

anniel

2562 Posts
Posted - 05/29/2017 :  08:40:46  Show Profile
Not necessarily, You can do a refresh as you do a double write.
Go to Top of Page
Reply #4

supervizeur

462 Posts
Posted - 05/30/2017 :  06:36:49  Show Profile
quote:
Originally posted by anniel

Not necessarily, You can do a refresh as you do a double write.


True.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000