MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Routine Writings Failing Suddenly		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

John32

USA
3 Posts
Posted - 10/21/2018 :  14:57:26  Show Profile  Reply with Quote
I'm trying to write a file on a M27C512. I have literally done this process thousands of times with no error. Suddenly I'm now getting this error on every chip I use:

Write failed, Address=0x000000, Buffer=0x00 Device=0xFF

The blank check function works fine and all chips are blank. What's going on?
Reply #1

anniel

2572 Posts
Posted - 10/21/2018 :  16:32:44  Show Profile  Reply with Quote
quote:
Originally posted by John32

I'm trying to write a file on a M27C512. I have literally done this process thousands of times with no error. Suddenly I'm now getting this error on every chip I use:

Write failed, Address=0x000000, Buffer=0x00 Device=0xFF

The blank check function works fine and all chips are blank. What's going on?



Same batch of chips?
Only M27C512 failing?
Go to Top of Page
Reply #2

John32

USA
3 Posts
Posted - 10/21/2018 :  18:49:03  Show Profile  Reply with Quote
I've tried different batches and different chips. All are having the exact same error. I'm wondering if my GQ 4X4 is broke?
Go to Top of Page
Reply #3

anniel

2572 Posts
Posted - 10/22/2018 :  03:06:54  Show Profile  Reply with Quote
quote:
Originally posted by John32

I've tried different batches and different chips. All are having the exact same error. I'm wondering if my GQ 4X4 is broke?


Try the hardware tests.
Go to Top of Page
Reply #4

John32

USA
3 Posts
Posted - 10/22/2018 :  19:22:38  Show Profile  Reply with Quote
The Hardware is detected and the voltage test said everything passed. I'll be honest, I don't really know what I'm doing with the hardware test. Is there something specific I should be doing?
Go to Top of Page
Reply #5

anniel

2572 Posts
Posted - 10/23/2018 :  03:38:45  Show Profile  Reply with Quote
quote:
Originally posted by John32

The Hardware is detected and the voltage test said everything passed. I'll be honest, I don't really know what I'm doing with the hardware test. Is there something specific I should be doing?


Look for discrepancies between your readings and the I/O diagnostics page.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.11 sec. Snitz Forums 2000