| Author |
 Topic  |
|
|
azure
Australia
3 Posts |
 Posted - 03/19/2010 : 13:26:34
|
Hi I am having problems trying to write to my pic18F2525 chip.
I have connected my chip via ICSP to the appropriate pins on the chip.
I select the pic with in the programmer and load the Hex file I'm trying to write.
When I try to write to the chip I get the error
Error Program Memory at 0x000000
Any help would be Appreciated
Cheers
|
|
| Reply #1
ZLM
2947 Posts |
Posted - 03/19/2010 : 16:52:46
|
| chip need to be erased before write. Do blank check before write. |
 |
|
| Reply #2
azure
Australia
3 Posts |
Posted - 03/20/2010 : 10:26:13
|
Still no luck.
First I clear the chip
Status: "CHK Blank Code OK (no Checksum CFG)"
Next I select program the chip the software says
"Programming Code (0x6000) Word"
This reaches 100%
It then says "Programming EEPROM (0x400) byte"
This reaches about 60% and fails with a status of "Error Program memory at 0x000000"
quote:
Originally posted by ZLM
chip need to be erased before write. Do blank check before write.
|
|
|
| Reply #3
ZLM
2947 Posts |
Posted - 03/24/2010 : 20:46:16
|
| That maybe software bug. |
|
|
| Reply #4
azure
Australia
3 Posts |
Posted - 03/25/2010 : 03:36:50
|
quote:
Originally posted by ZLM
That maybe software bug.
Ok, I am running the latest software that came with the programmer and I can find no newer versions online.
Is there any other software compatible with the Willem pcb50 programmer? or do I need to go buy a new programmer..
|
|
|
| Reply #5
ZLM
2947 Posts |
Posted - 03/26/2010 : 10:55:29
|
| Try IC-Prog Software. that works with this programmer. |
|
|
| |
Topic |
|
Pic 18F2525 with PCB50 problems
Forum Locked
