MCUmall EPROM BIOS Chip Burner Forum
Home
|
Profile
|
Register
|
Active Topics
|
Members
|
Search
|
FAQ
Username:
Password:
Save Password
Forgot your Password?
All Forums
MCUmall Forums
Novice Place
Check eprom condition
New Topic
Reply to Topic
Printer Friendly
Author
Topic
Haxxer
3 Posts
Posted - 07/01/2010 : 05:35:30
Hi!
If I verify a eprom in USBPrg, can I be 100% sure that it will work?
I suppose the whole eprom is tested?
Reply #1
ZLM
2941 Posts
Posted - 07/01/2010 : 09:41:09
If the EPROM passed write and verification, then the EPROM is considered programmed successfully. It should work correctly.
Reply #2
Haxxer
3 Posts
Posted - 07/01/2010 : 10:46:32
Sounds good.
I will sell some programmed tuning chips to a company, but there are no need to test them in the ecu before sale or?
Reply #3
ZLM
2941 Posts
Posted - 07/01/2010 : 12:18:01
No.
Or you can jus test one chip to confirm you programmed a correct data file.
Reply #4
Haxxer
3 Posts
Posted - 07/02/2010 : 02:35:42
Ok, thanks for the info.
Topic
New Topic
Reply to Topic
Printer Friendly
Jump To:
Select Forum
MCUmall Forums
General Discuss
Novice Place
True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
GQ-5X
Automobile engine ECU, Immo, Air bag chip tunning
Using The Enhanced/Dual power Willem Programmer
Open Source Project Willem Programmer Hardware
Wellon/WEILEI USB Programmer
TOP USB Programmer
EasyPRO/SmartPRO USB Programmer
PIC Programmer
Using the AVR JTAG ICE and AVRISP ISP programmer
--------------------
Home
Active Topics
Frequently Asked Questions
Member Information
Search Page
MCUmall EPROM BIOS Chip Burner Forum
© Copyright 2003 - 2009 Mcumall Electronics Inc.
Generated in 0.08 sec.
Snitz Forums 2000