| Author |
 Topic  |
|
|
cyrax
Spain
43 Posts |
 Posted - 03/06/2017 : 08:11:17
|
Hello again.
Some time ago I got a universal adapter for willem PLCC32 / 32 to access plc 32 chips.
Well, I have these chips:
PM49FL004T * PLC32
W39V040CPZ
The two chips are added by default in willem, I have not had to change anything in devices txt.
But it turns out that neither of the two chips detects them, I have proven in all possible ways by placing the chip, and nothing, it detects me several brands and devices, but not the correct one.
What can be due?
With other spi chips if it works.
Could it be the 32/32 plc adapter fault?
I do not know, but I do not know what to do to get caught.
Any way to know if the plc32 / 32 adapter works ok?
Greetings. |
|
| Reply #1
anniel
2590 Posts |
Posted - 03/06/2017 : 13:02:42
|
Are the adapter pins and contacts clean? Is your adapter aligned correctly?
 |
 |
|
| Reply #2
cyrax
Spain
43 Posts |
Posted - 03/06/2017 : 23:58:15
|
I think I was wrong choosing my adapter, I bought it very cheaply:
Www.ebay.es/itm/141907853536?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Is not that right?
You could tell me if it works or not, and if it does not, I have to look for the correct one, in which case I would appreciate a link to the exact adapter model.
Greetings. |
|
|
| Reply #3
anniel
2590 Posts |
|
| Reply #4
cyrax
Spain
43 Posts |
Posted - 03/07/2017 : 06:23:44
|
Thank you very much for the clarification.
Then I should get the willem adapter.
One question, are there any clips for the 32-pin chips? Ie as the test soice 8 for the spi chips.
Greetings. |
|
|
| Reply #5
anniel
2590 Posts |
Posted - 03/07/2017 : 08:46:39
|
| Yes, Pomona 5733 or as a set Pomona 5515A. |
|
|
| Reply #6
cyrax
Spain
43 Posts |
Posted - 03/07/2017 : 09:57:04
|
I have seen a set of pieces:
www.ebay.es/itm/Pomona-Electronics-SOIC-Model-5515A-Test-Clip-Kit-/272561150326?hash=item3f75e91976:g:BZYAAOSwUKxYcV9W
But I do not see how they work, and if more pieces are needed, better not buy it.
It is possible to access with willem all the chips of a motherboard? For example the chip lan, or the audio chip, chipset, etc ... to reprogram them with willem ??
I do not know where to find a place to explain this, if it is possible to do so.
I have an old motherboard, an av8 vm be asus, which has a backdoor.
The lan chip, blocked, and I would like to be able to reflaste it with willem if possible, why no program in msdos, or linux to do it.
Greetings. |
|
|
| Reply #7
anniel
2590 Posts |
Posted - 03/07/2017 : 16:15:49
|
| Yes the 28 pins clip is missing. Yes you can access and modify any programmable chips on a motherboard with your programmer. |
|
|
| Reply #8
anniel
2590 Posts |
Posted - 03/08/2017 : 04:30:15
|
Those are complete sets.
|
|
|
| Reply #9
cyrax
Spain
43 Posts |
Posted - 03/10/2017 : 14:27:45
|
And these pomona connect with willem with some cables I suppose?
I do not have the slightest idea how they work, I do not know that it takes more or nothing.
At the moment I'm not going to buy it, too much money.
I will continue to test willem and learn.
When I clarify more with this, I will ask my doubts.
Thank you very much. |
|
|
| Reply #10
anniel
2590 Posts |
Posted - 03/10/2017 : 14:36:33
|
Yes, common jumpers.
Pomona are not the same quality as Chinese copies, hence the price. |
|
|
| Reply #11
supervizeur
462 Posts |
Posted - 03/31/2017 : 10:37:24
|
| +1 for Pomona! |
|
|
| Reply #12
anniel
2590 Posts |
Posted - 03/31/2017 : 11:51:43
|
| There is other well regarded manufacturers and they have in common not being Chinese! |
|
|
| Reply #13
supervizeur
462 Posts |
Posted - 04/01/2017 : 12:39:05
|
Yes, I also have "AP PRODUCTS" and "3M" IC test clips. Some "Ironwood" adapters too.
|
|
|
| Reply #14
anniel
2590 Posts |
Posted - 04/01/2017 : 16:20:08
|
| Same here and some precision probe sets. |
|
|
| Reply #15
supervizeur
462 Posts |
Posted - 04/11/2017 : 18:15:19
|
| Let me guess HP/Agilent/Keysight or Tek? |
|
|
| Reply #16
anniel
2590 Posts |
Posted - 04/15/2017 : 06:29:01
|
| In fact I have sets of both. I also have cheaper Andromeda Research Labs PPS8 sets and some from MCU Mall for general purpose use. |
|
|
| Reply #17
supervizeur
462 Posts |
Posted - 04/25/2017 : 12:14:15
|
| The ChipQuik FP-1B30 MicroGripper is excellent and price is good. |
|
|
| Reply #18
anniel
2590 Posts |
Posted - 04/26/2017 : 10:26:51
|
| Yes, ChipQuik makes nice products. |
|
|
| Reply #19
supervizeur
462 Posts |
Posted - 06/12/2017 : 08:16:16
|
quote:
Originally posted by anniel
Yes, ChipQuik makes nice products.
Except their "Chip Quik Alloy". Just done a rework on a board that had a previous tentative rework done by a client with it. At least he was honest about it. Cost him around $350 plus whatever he paid for the magic "alloy" and what his time is worth. Would have cost him something like $150 if had came to me first in place of listening some internet advise.
Moral of the story: Use the right tools and knowledge or let the pros do it. |
|
|
| Reply #20
anniel
2590 Posts |
Posted - 06/15/2017 : 19:18:45
|
quote:
Originally posted by supervizeur
quote:
Originally posted by anniel
Yes, ChipQuik makes nice products.
Except their "Chip Quik Alloy". Just done a rework on a board that had a previous tentative rework done by a client with it. At least he was honest about it. Cost him around $350 plus whatever he paid for the magic "alloy" and what his time is worth. Would have cost him something like $150 if had came to me first in place of listening some internet advise.
Moral of the story: Use the right tools and knowledge or let the pros do it.
True. |
|
|
| |
Topic |
|
I can not detect plc 32 chips.
Forum Locked
