| T O P I C R E V I E W |
| webgas |
Posted - 07/30/2015 : 03:34:45
With the recent update is available the use of this EEPROM DS2431,
I tried to read different in my possession is the hexadecimal result is: 1F or 2F or 3F etc ... i believe correct.
Question how do I write it? after several attempts I always get verify failed and the EEPROM is not just written !!! |
| 6 L A T E S T R E P L I E S (Newest First) |
| psgama |
Posted - 03/13/2018 : 09:38:39
Has this chip been supported yet? |
| psgama |
Posted - 06/23/2016 : 16:08:18
Any progress with the DS2431? It is not showing up on the supported device list, although it shows in the text based device file in the program folder.
|
| webgas |
Posted - 11/18/2015 : 11:57:59
I confirm the failure with the software 6.38
the reading is incorrect, any data(FF or 00) is contained in the chip, I find myself always 1F read.
openprogrammer works with these chips :( |
| ZLM |
Posted - 08/07/2015 : 07:15:30
Checked this DS2431.
It is not fully supported yet, it is under testing. The read/write are not fully tested. It still need sometimes to finish the testing. |
| webgas |
Posted - 08/07/2015 : 04:40:47
DS2431 is supported on the device "GQ-4X" from software version 6:36:
http://www.mcumall.com/comersus/store/mcumall_TrueUSBWillemsupportICs.asp
perhaps it is still in testing?
I consider all my reading not correct?
to let me know when you can work well with one wire protocol EEPROM, or I'll have to buy another programmer for these EEPROM. |
| ZLM |
Posted - 08/02/2015 : 17:31:01
The DS2431 is one wire protocol EEPROM. It is not in the supported list yet. It will be added later. |
