MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 EasyPRO/SmartPRO USB Programmer
 question about EasyPro 90B		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Escher

4 Posts
Posted - 11/24/2006 :  10:14:58  Show Profile
As TOP2005 the EasyPro 90B during the programming it use the pc's cpu ? is it more velocity than top2005 ?
Reply #1

ZLM

2945 Posts
Posted - 11/26/2006 :  18:56:47  Show Profile
It has on board CPU in the programmer.
Go to Top of Page
Reply #2

Escher

4 Posts
Posted - 12/14/2006 :  06:21:33  Show Profile
Is there any device pin check on this programmer ?
Go to Top of Page
Reply #3

ZLM

2945 Posts
Posted - 12/15/2006 :  17:27:51  Show Profile
quote:
Originally posted by Escher

Is there any device pin check on this programmer ?

TOP2005 has pin check.
Easy Pro B has no pin check but it has ID check. If the ID not match, then it will message.
Go to Top of Page
Reply #4

Escher

4 Posts
Posted - 12/24/2006 :  20:13:52  Show Profile

is there one correct procedure to program the ic (for example SST flash) ?
because I don't succeed to program them
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000