MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Gq-4x and 4x4
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Grisly

USA
2 Posts

Posted - 03/07/2018 :  16:45:34  Show Profile  Reply with Quote
I’ve had a 4x for a few years now and it recently stopped reading at25020 eeprom. There’s no error, it just shows FF as if it’s not getting a good connection but if I disconnected and reconnected it a bunch of times it would work. Last weekend I couldn’t get it to work at all so after trying a new soic clip and a new usb cable I just ended up buying a 4x4 and it is doing the same thing. I have programmed hundreds of these and this problem just randomly appeared one day. Any ideas?
Reply #1

anniel

2572 Posts

Posted - 03/07/2018 :  18:55:56  Show Profile  Reply with Quote
quote:
Originally posted by Grisly

I’ve had a 4x for a few years now and it recently stopped reading at25020 eeprom. There’s no error, it just shows FF as if it’s not getting a good connection but if I disconnected and reconnected it a bunch of times it would work. Last weekend I couldn’t get it to work at all so after trying a new soic clip and a new usb cable I just ended up buying a 4x4 and it is doing the same thing. I have programmed hundreds of these and this problem just randomly appeared one day. Any ideas?



If both programmers give the same results I would go for a bad chip.
Go to Top of Page
Reply #2

Grisly

USA
2 Posts

Posted - 03/07/2018 :  20:34:49  Show Profile  Reply with Quote
I thought that as well, do I tried 4 different ones
Go to Top of Page
Reply #3

Rabite2

9 Posts

Posted - 03/07/2018 :  22:42:56  Show Profile  Reply with Quote
I, personally, would suspect that something's wrong with your pc, maybe the usb ports. I would try the same proccess on another system, just to be sure.
Hope this helps, a bit

Edited by - Rabite2 on 03/07/2018 22:44:14
Go to Top of Page
Reply #4

anniel

2572 Posts

Posted - 03/09/2018 :  12:33:09  Show Profile  Reply with Quote
quote:
Originally posted by Grisly

I thought that as well, do I tried 4 different ones



From the same batch?
Go to Top of Page
Reply #5

anniel

2572 Posts

Posted - 03/09/2018 :  12:34:27  Show Profile  Reply with Quote
quote:
Originally posted by Rabite2

I, personally, would suspect that something's wrong with your pc, maybe the usb ports. I would try the same proccess on another system, just to be sure.
Hope this helps, a bit



Damaged devices.txt maybe?
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.1 sec. Snitz Forums 2000