MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 device starting point		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

84sslt1

USA
13 Posts
Posted - 04/25/2008 :  03:38:14  Show Profile
Willem dual powered usb unit ,, sst flash chip, Will I be prompted to set this start point? And when? Tim
Reply #1

ZLM

2945 Posts
Posted - 04/25/2008 :  08:36:16  Show Profile
No prompt message. But there is an Offset(Hex) box to fill up.
Go to Top of Page
Reply #2

84sslt1

USA
13 Posts
Posted - 04/25/2008 :  09:28:17  Show Profile
What do I put there? Is that value specific to the chip type?
Go to Top of Page
Reply #3

ZLM

2945 Posts
Posted - 04/25/2008 :  16:22:25  Show Profile
It can be set on any flash chips. Such as 27SF512.
Go to Top of Page
Reply #4

84sslt1

USA
13 Posts
Posted - 04/29/2008 :  16:05:53  Show Profile
What value do I set it at?? Somewhere I saw set it to zero.. Is there a hex number specific,,, ??
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.14 sec. Snitz Forums 2000