MCUmall EPROM BIOS Chip Burner Forum - usb pic programmer board not responding

MCUmall EPROM BIOS Chip Burner Forum

Username:	Password:
Save Password
Forgot your Password?

All Forums

MCUmall Forums

PIC Programmer

usb pic programmer board not responding

Forum Locked

Printer Friendly

Author

Topic

wonderfulwaldo

USA
3 Posts

Posted - 10/04/2008 : 00:03:55

When i try to use my new usb pic programmer

h**p://www.mcumall.com/forum/uploaded/gameromz/200899123024_K149v2_300.jpg

it says board not responding, then it says will reset. Then this error comes up

h**p://s538.photobucket.com/scriptlbums/ff343/wonderfulwaldo/?action=view¤t=IMG_0105.jpg

h**p://s538.photobucket.com/scriptlbums/ff343/wonderfulwaldo/?action=view¤t=IMG_0104.jpg

Reply #1

wonderfulwaldo

USA
3 Posts

Posted - 10/04/2008 : 00:12:02

http://www.mcumall.com/comersus/store/catalog/K149v2_300.jpg

Reply #2

ZLM

2945 Posts

Posted - 10/05/2008 : 09:30:46

Check your driver if loaded and assigned a comport number to it. Also, you have assigned this comport number in the software.

Try on another computer too.

Reply #3

Twistx77

2 Posts

Posted - 10/08/2008 : 04:26:02

I have the same problem and tried everything in the last post and it wont work. I tried several computers and different OS

Reply #4

ZLM

2945 Posts

Posted - 10/09/2008 : 18:12:14

You need to check the USB driver if loaded. If not, then have to reinstall the driver.
If the USB driver is loaded and assigned a vailid comport number, assign that comport number to the USB PIC software.
If everything OK but it still does not work(no response from programmer), then the programmer may be defective.

Topic

Forum Locked

Printer Friendly

Jump To:

MCUmall EPROM BIOS Chip Burner Forum

Generated in 0.06 sec.

Snitz Forums 2000