MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 PIC Programmer
 USB Programmer FUSE setting Abbrev?		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

brentfinley

USA
3 Posts
Posted - 10/21/2008 :  13:59:11  Show Profile
Hi,

Can anyone shed some light on the fuse configuration Abbreviations?
I am programming a 16F628 and some of the names are confusing.

Like in the Oscillator section.

HS - self explanatory.
many follow standard names, but the 2 modes of internal oscillator naming seem cryptic.

is there a list of exactly what they are?

Also.. is there a way to get the programmer to read in the configuration file written by the proton Pic Basic Pro compiler?
They write out a config file for the fuses. Can it be refreshed with the programmer Refresh button that does the code to?

Thanks,

Brent
Reply #1

ZLM

2945 Posts
Posted - 10/22/2008 :  10:30:12  Show Profile
For the fuse information, you can find it from the chip datasheet. The datasheet you can find from: http://ww1.microchip.com/downloads/en/DeviceDoc/40044F.pdf
If your PIC Basic Pro compiler generate standard Hex file and it with configuration information, then the software us able to read it.
Go to Top of Page
Reply #2

brentfinley

USA
3 Posts
Posted - 10/27/2008 :  12:06:18  Show Profile
Can your programmer be run in command line mode? This way it could integrate with the proton IDE: http://www.picbasic.org/proton_development_suite.php

They have a configurable command line generator that can call your program with parameters (no gui) to push the code directly to the chip.

Does your software work with this?
Go to Top of Page
Reply #3

ZLM

2945 Posts
Posted - 10/28/2008 :  22:05:03  Show Profile
No. This programmer only supports Windows GUI interface.
Go to Top of Page
Reply #4

brentfinley

USA
3 Posts
Posted - 10/29/2008 :  12:05:08  Show Profile
What would it take to make it command line operational? It would be good for business if you can get a major IDE to integrate with your programmer.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000