MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 PIC Programmer
 ICSP and 18f4321		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

mikec531

USA
7 Posts
Posted - 02/12/2009 :  10:08:50  Show Profile
The only thing that the USB Pic Programmer does in the ICSP mode is says:
The programmer does not recognise the [18f4321] processor
Continue anyway?

It programs fine in the socket.

Any help would be appriciated.

Thanks

Mike
Reply #1

ZLM

2945 Posts
Posted - 02/12/2009 :  21:32:06  Show Profile
Check your connection again, if no problem, then connect the ISCP from the socket using non-ICSP mode. See if it works in that way. This is to eliminate problem on your target circuit.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000