MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Discontinued emp-21 programmer
 Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

busdriver

3 Posts

Posted - 03/31/2009 :  10:45:17  Show Profile
I have an emp-21 programmer from Needham's electronics that was discontinued a few years ago. I am trying to program an Intel E28F640J3A TSOP56, but don't have the adapter E21-TSOP56-J3 and there is no information available anywhere to determine the pin connections to build the adapter nor anywhere to buy one. Does anyone know if there is a way to determine the pinout for this universal programmer (ex: pin 1 = A1, etc) or would anyone have one of these adapters laying around that could send me the pin configuration? I really appreciate any help or information you can find.

Thanks in advance for your help!
Reply #1

yelenavik

USA
31 Posts

Posted - 03/31/2009 :  12:16:56  Show Profile
I have same problem with EMP-11.i have only 111 a-b adapter for plcc32,but cant buy separate 112-114 family.programmer very good proffecional.
Go to Top of Page
Reply #2

yelenavik

USA
31 Posts

Posted - 03/31/2009 :  12:20:08  Show Profile
I could be make yourself but need schematic jumpers,no information ,because company missing.
Go to Top of Page
Reply #3

busdriver

3 Posts

Posted - 04/02/2009 :  10:35:53  Show Profile
I would love to make one myself, but I just can't find the information. Hopefully someone who sees this will have one laying around to get the pinout or know how I can test the programmer. I'm even trying to figure how to reverse the encrypted dll file.
Go to Top of Page
Reply #4

ZLM

2945 Posts

Posted - 04/02/2009 :  18:16:17  Show Profile
I think the MCUmall should consider to design a TSOP56 adapter on GQ-4X. It should cover Intel E28F160, E28F320, E28F640.
Go to Top of Page
Reply #5

busdriver

3 Posts

Posted - 04/12/2009 :  05:20:06  Show Profile
If someone knows how to test the pins on a universal programmer to determine which signal is present, that would be a great start. Adapters could be easily and cheaply built when data is not available for any programmer. I've taken voltage readings on each pin of my emp-21, but can't seem to find a usable pattern.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000