MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 Help on The Dual Power Willem Programmer		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

MaddMan

USA
2 Posts
Posted - 01/22/2006 :  11:36:57  Show Profile
hi could somebody please help me on how to work this programer i have no clue wat iam doing its already installed on my computer and the chip iam trying to burn is the AT29C256 the programer reads it and verify it but i really dont know what to do after. And could the programer read what the chip has on it and beable to copy it to the computer. also if there is some guide with pictures on how to program this chip and copy it to the computer please let me know Thank You
Marc
Reply #1

ZLM

2945 Posts
Posted - 01/23/2006 :  23:45:16  Show Profile
See http://www.mcumall.com/forum/topic.asp?TOPIC_ID=97

Once you read the chip, then click on menu "File" and then "Save as".
You can save the data into the disk as a file.
Edited by - ZLM on 01/23/2006 23:47:07
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.07 sec. Snitz Forums 2000