MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 help setting up configuration for PIC		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

TheRain

5 Posts
Posted - 03/15/2006 :  19:02:31  Show Profile
This is my first attempt at a PIC project. I'm using a TOP2004 with a PIC16F877A chip. My problem is that I cannot figure out what the configuration bits should be set to in the top programmer software. Mostly it is the FOSC0 and FOSC1 that I am not sure what to do with. I want to use a 4Mhz crystal with my PIC... besides that I am just trying to blink a single LED from PORTB bit 0. Can anyone help??
Reply #1

ZLM

2945 Posts
Posted - 03/15/2006 :  21:35:51  Show Profile
see:
http://ww1.microchip.com/downloads/en/devicedoc/39582b.pdf
Go to Top of Page
Reply #2

TheRain

5 Posts
Posted - 03/15/2006 :  21:49:02  Show Profile
thanks, but that doesn't really help... I need to set it up for XT clock I think, but I see no way of doing that.
Go to Top of Page
Reply #3

TheRain

5 Posts
Posted - 03/15/2006 :  23:13:01  Show Profile
ok, nevermind... i didn't see how this corresponded but now I see the configuration bits in there... thanks!
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000