MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 PIC Programmer
 Enhance JDM Programmer		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

BarryH

USA
1 Posts
Posted - 07/04/2011 :  19:16:40  Show Profile
I have the "Enhance JDM PIC programmer Microchip with 40pin ZIF" trying to read/write to a PIC 16F689 (20pin device). I tried winpic800; PicPgm; ponyprogV206f; ICprog105D; winpicprog1.0.1.2. None of these programs can detect this device. Is it really supported? the Ebay listing shows it is but the mcumall website does not list 16F689 and I cannot find any instructions were to place pin1 in the 40 pin ZIF. Anyone used this programmer with the same device?
Reply #1

ZLM

2945 Posts
Posted - 07/14/2011 :  16:55:17  Show Profile
The 20 pin chip is not supported on 40pin ZIF soclet. You need to use ICSP connection.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000