MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Trouble with programming 29LV160		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

ecoram

1 Posts
Posted - 08/28/2011 :  19:27:39  Show Profile
Hello,

I have GQ3X programmer with ADP-003 adaptor. When trying
to write to ES29LV160ET-70TGI EEPROM error occurs:

"Write failed, Address=0x000000, Buffer=0x53 Device=0xFF"

I set device in USBPROG menu as 29LV160T generic chip. Jumper is set to 5V. It seems to be some common stupid mistake but I couldn't understand
what I'm doing wrong way.
Help !
Reply #1

ZLM

2945 Posts
Posted - 09/04/2011 :  08:40:25  Show Profile
Make sure you can get correct ID of chip. If not, check chip pin contacting.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000