MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 Dual Power Willem EPROM timeout error		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

thundachiken

2 Posts
Posted - 09/05/2006 :  09:39:33  Show Profile
Hey guys, this is my first post. When I try to erase AT29C256 chips, I get a time out error. It will confirm h/w, chip ID, read & verify, & program ok, but not erase.

Any ideas?

Kevin
Reply #1

ZLM

2945 Posts
Posted - 09/05/2006 :  10:37:32  Show Profile
AT29C256 does not need a erase. It will be overwiten by new data.
If you need a blank chip, fill the buffer by FF and write it to chip.
Go to Top of Page
Reply #2

thundachiken

2 Posts
Posted - 09/05/2006 :  11:04:23  Show Profile
Aahhh, i did'nt know that about those chips. But is there still a problem with my settings that allow it to time out?

Thanks!
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.05 sec. Snitz Forums 2000