MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 GQ-4X and PIC12F629 verification problem		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

geoanas

Greece
8 Posts
Posted - 03/01/2014 :  21:44:50  Show Profile
Hi
I have a GQ-4X programmer and software ver.6.29 installed on my computer.
I tried to program some PIC12F629 chips and despite all my efforts every single one fails on verification process.
What shall I do ?
Reply #1

ZLM

2945 Posts
Posted - 03/02/2014 :  11:43:14  Show Profile
Can you get chip ID correctly?
Did you erased the chip and passed the blank check?
What is your exac error message?
Go to Top of Page
Reply #2

geoanas

Greece
8 Posts
Posted - 03/03/2014 :  13:44:07  Show Profile
Yes I can get the chip's ID correctly
When I erase the chip, it passes the blank check.
When verification process starts, I always get an error with "Configuration VerifyFailed".
Seems that problem is on PIC's Configuration....
Go to Top of Page
Reply #3

ZLM

2945 Posts
Posted - 03/03/2014 :  14:55:13  Show Profile
I think your configuration word has a wrong data.

Can you do a screen copy and paste here for the configuration words tab?


The chip should be OK.
Go to Top of Page
Reply #4

geoanas

Greece
8 Posts
Posted - 03/04/2014 :  08:22:44  Show Profile
Ok ! First one shows the error message and the latter is the configuration TAB after Verification Failure

Image Insert:

107.2 KB

Image Insert:

81.76 KB
Go to Top of Page
Reply #5

ZLM

2945 Posts
Posted - 03/06/2014 :  19:31:31  Show Profile
It is looks OK.

Try to read the chip and see hat is the CFG value you got. If you got 3FFF CFG value, then the chip should be programmed correctly. There is a software bug here.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.1 sec. Snitz Forums 2000