MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 GQ-5X
 Blank Check failed after Erase		  Forum Locked
 Printer Friendly
Author Previous Topic Topic   

PFM

10 Posts
Posted - 02/19/2015 :  16:28:14  Show Profile
Hello,

I am trying to reuse 4 NAND chips (Samsung K9F4G08U0D).

2 were well erased and after blank check they were blank and I then reprogrammed them.

Instead, 2 of them get an error when I perform blank check:

"Flash is not blank at address 1C476000 ,target 00"

What does it mean, please?

Can these chips be reprogrammed, or are they bad?

Thanks
Reply #1

GQ5XSupport

104 Posts
Posted - 02/19/2015 :  21:13:16  Show Profile
Nand flashes often have bad sectors. So those sectors cannot be reprogrammed.
In OS they will mark them as bad sector and continue to use it. However as programmer it will not know the algorithm to bypass it
To proper way to use it is program the boot (u-boot) and then let the target to program itself. A pure clone will not work if the target has bad sectors.

GQ-5x can be used for backup or data recover purpose. If you want to use programmer to produce clone, then make sure the target has no bad sectors.
Go to Top of Page
Reply #2

PFM

10 Posts
Posted - 02/20/2015 :  11:51:49  Show Profile
Thanks for your reply!
Go to Top of Page
Reply #3

eduardo48

Argentina
152 Posts
Posted - 06/25/2015 :  19:18:19  Show Profile
Hello you can explain the u-boot program. I have nand that are in good, but has sectors with zeros, and erase command that puts non ff
Go to Top of Page
  Previous Topic Topic   
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.11 sec. Snitz Forums 2000