MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 PIC Programmer
 Problem to program my 12F629		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

mrocks

1 Posts
Posted - 01/02/2008 :  03:35:56  Show Profile
Hi!
I have bought few weeks ago a programmer of eBay (on your shop)
I received today 10 pics 12F629 to try again program but it doesn't work.
I have installed the soft "DIY Programmer" when I have downloaded the archive "USB_PIC_CD.ZIP" on your website.

The programmer is detected (red led on when I read the PIC) but it's impossible to program a PIC.
After, I have downloaded WinPIC800, nothing is detected, I have this message "ERROR -> Hardware is not responding"
I don't know what to do ...
The programmer that I've bought is http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=3141

Thanks you for your help.
PS : I'm sorry if my english is not very good :p
Reply #1

ZLM

2945 Posts
Posted - 01/03/2008 :  20:04:56  Show Profile
This is USB PIC Programmer, not the JDM programmer.

Check your chip position in ZIF and orientation.

The pin 1 of PIC12F629 should in the pin 13 of ZIF socket. The software will show the chip position after you selected the chip type 12F629.

Only software in the "USB_PIC_CD.ZIP" will work with tis USB PIC programmer. No other software works on this programmer.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.11 sec. Snitz Forums 2000