MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 Messege in Top 2004 no connected pins		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

gsm

Portugal
1 Posts
Posted - 01/17/2010 :  13:01:41  Show Profile
I
I really need to now what this massege ?And if is any interference whit the eeprom program processes....

I make read whit this connected messege and the program have a messege in the final like...01ffff and OK

Sorry my ingles

Regards to all
power just need it
Reply #1

simeon

United Kingdom
79 Posts
Posted - 01/25/2010 :  16:56:05  Show Profile
ok is ok blank

with top i discover all eproms settings in the config files are wrong
to be able to program

you need to find in the cfg file in programmer apps folder

the eprom line for your chip

its v5 you use so change to add

,vcc=6250
to the end of the line for the type of chip you have

i know support for 2004 is gone in v6 software

my 2049 survive for now
only chip that fails so far is 27c1000
machine toshiba equium laptop usb only type
p5b asus main machine
thinking of adding dual lpt pci card
both used for top and lpt via usb where i can

old p2 programming grumbling tank with xp sp3 for true serial and lpt

all machines bios set to enable bios plug and play aware o/s and lpt spollers services and drivers removed
legacy detection enabled
Go to Top of Page
Reply #2

osvaldo

Argentina
148 Posts
Posted - 02/09/2014 :  13:24:24  Show Profile
because I spend so I tested with hotra vercion soft and greetings from
osvaldo tecnico
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000