MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 USBprog.exe freezes up		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

chevyp2p

USA
3 Posts
Posted - 03/20/2010 :  17:37:13  Show Profile
I received my GQ-4X about a week ago and I've not been able to make it work.
The USBprog.exe freezes up and the screen stays on "Initializing please remove the chip from ZIF socket ..... reconnect the programmer if needed"

I know for sure that the drivers were installed properly.
I have tried on Vista, windows 7, and XP with the same results.

I'm not able to close the program unless I disconnect the programmer or restart my computer.

Does any one knows a way to solve this, I really need to program a couple of chips by the end of next week.

Thank You for any help you can provide me with.
Reply #1

ZLM

2945 Posts
Posted - 03/24/2010 :  20:44:16  Show Profile
It seems you already tried on different computer, and different USB cable.

If this is the case, then your programmer maybe malfunction due to some reason. You need to send it back for replacement.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.13 sec. Snitz Forums 2000