MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 PRG-022 with 16F648A - Not working		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

jkittle99

2 Posts
Posted - 06/07/2010 :  19:26:40  Show Profile
I've got a new enhanced jdm programmer and 16F648A chip. This thing is on drugs :) Tried every piece of software I can get my hands on, and not able to successfully write a chip. Using external 12v for programming to eliminate low voltage serial port issues. So the short is - I run an erase, and try to blank verify, and it mostly comes back not blank. I try to write something, and it comes back failing verification. Can somebody please tell me how to get this working?
Reply #1

jkittle99

2 Posts
Posted - 06/08/2010 :  06:49:20  Show Profile
I found out the chip was originally programmed HVP. If that matters.

j
Go to Top of Page
Reply #2

ZLM

2945 Posts
Posted - 06/10/2010 :  16:06:15  Show Profile
check your configuration bit. If you want to verified it after write, then the code protect bit should be OFF.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000