MCUmall EPROM BIOS Chip Burner Forum
Home
|
Profile
|
Register
|
Active Topics
|
Members
|
Search
|
FAQ
Username:
Password:
Save Password
Forgot your Password?
All Forums
MCUmall Forums
PIC Programmer
18F2420 ID issue
Forum Locked
Printer Friendly
Author
Topic
ZLM
2945 Posts
Posted - 12/13/2011 : 10:41:06
Just found there is a mistake in the ¡°chipdata.cid¡± device file.
Please open this file and change the ID to 1140:
Steps:
1. open the ¡°chipdata.cid¡± device file in the software directory.
2. find the device section for 18F2420.
3. you will see:
....
CHIPname=18F2420
INCLUDE=Y
KITSRUS.COM=28Npin
....
...
ChipID=0C80
4. change the id to 1140.
....
ChipID=1140
....
5. save the file
6.restart the software.
Topic
Forum Locked
Printer Friendly
Jump To:
Select Forum
MCUmall Forums
General Discuss
Novice Place
True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
GQ-5X
Automobile engine ECU, Immo, Air bag chip tunning
Using The Enhanced/Dual power Willem Programmer
Wellon/WEILEI USB Programmer
TOP USB Programmer
EasyPRO/SmartPRO USB Programmer
PIC Programmer
Using the AVR JTAG ICE and AVRISP ISP programmer
--------------------
Home
Active Topics
Frequently Asked Questions
Member Information
Search Page
MCUmall EPROM BIOS Chip Burner Forum
© Copyright 2003 - 2009 Mcumall Electronics Inc.
Generated in 0.08 sec.
Snitz Forums 2000
18F2420 ID issue
Forum Locked
Posted - 12/13/2011 : 10:41:06
