MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Automobile engine ECU, Immo, Air bag chip tunning
 what adaptor clip for civic 9564 eeprom		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

snooker147

8 Posts
Posted - 04/08/2011 :  10:33:10  Show Profile
what adaptor clip for civic 9564 eeprom ( air bag module)
Reply #1

toastyesq

8 Posts
Posted - 04/08/2011 :  10:43:16  Show Profile
I am also working on one of these. I think it needs tool-015, I hope zlm can verify...
Go to Top of Page
Reply #2

snooker147

8 Posts
Posted - 04/09/2011 :  14:35:49  Show Profile
it too small. i dont think tool-105 will work.
Go to Top of Page
Reply #3

ZLM

2945 Posts
Posted - 04/09/2011 :  21:23:29  Show Profile
If your chip is SOIC8, then ADP-004 or TOOL-012A may work.
Go to Top of Page
Reply #4

toastyesq

8 Posts
Posted - 04/11/2011 :  10:47:23  Show Profile
I tried adp-004, and the chip is too small. I did a bit more research and found a guy using micro clips, smaller than tool-015. Radio shack has some adapters that may work for TOOL-105, and I will try that when the tool gets here, hopefully in the next couple of days.
Go to Top of Page
Reply #5

snooker147

8 Posts
Posted - 04/11/2011 :  19:39:27  Show Profile
i found out the Precision probe set
sell from arlabs.com can do the job but cost too much. $229 a set of 8.i just solder 8 small wires to the legs then read the chip. it work but u need some solder skill.
Go to Top of Page
Reply #6

toastyesq

8 Posts
Posted - 04/12/2011 :  13:29:36  Show Profile
that makes sense. The only issue now is to figure out what to tell the GQ-4X is reading. Do I just pick a random chip?
Go to Top of Page
Reply #7

snooker147

8 Posts
Posted - 04/12/2011 :  14:41:02  Show Profile
these have two chips one is 9564 other is 9532. crash data is in 9564
Go to Top of Page
Reply #8

snooker147

8 Posts
Posted - 04/12/2011 :  14:50:56  Show Profile
the chip is from ST. i select m9564 from GQ-4x
Go to Top of Page
Reply #9

toastyesq

8 Posts
Posted - 04/12/2011 :  14:58:01  Show Profile
Ah. Gotcha ok I will try it asap.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.14 sec. Snitz Forums 2000