| T O P I C R E V I E W |
| jtmckinn |
Posted - 02/15/2017 : 06:07:54
I'm helping a friend revive some brunswick boards. I read the d2764a from a working board and verified them to the saved bin. pulled some d2764a's from a different board, erased, wrote, and verified those. Even though they verified when I try to boot the board with these burned chips it doesn't work. with the original rom set the board still works correctly. Any ideas? |
| 3 L A T E S T R E P L I E S (Newest First) |
| anniel |
Posted - 11/21/2017 : 09:03:21
quote:
Originally posted by fusioncliffs
I had a recent issue with an Intel 2764A it would read only "FF" data and would not verify. After much trial and error I found out the Toshiba TMM2764A protocol works perfectly !
Thank you for the info fusioncliffs.
The only difference is WVCC="6.2V". |
| fusioncliffs |
Posted - 11/21/2017 : 08:41:40
I had a recent issue with an Intel 2764A it would read only "FF" data and would not verify. After much trial and error I found out the Toshiba TMM2764A protocol works perfectly ! |
| ZLM |
Posted - 02/19/2017 : 00:18:56
Make sure the original chip checksum is same as the copied chip. |
