MCUmall EPROM BIOS Chip Burner Forum

MCUmall EPROM BIOS Chip Burner Forum

All Forums

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:

UserName:

Password:

Format Mode:

Format:

Message:

* HTML is OFF
* Forum Code is ON

Insert an Image File
Check here to include your profile signature.

T O P I C R E V I E W
jtmckinn	Posted - 02/15/2017 : 06:07:54 I'm helping a friend revive some brunswick boards. I read the d2764a from a working board and verified them to the saved bin. pulled some d2764a's from a different board, erased, wrote, and verified those. Even though they verified when I try to boot the board with these burned chips it doesn't work. with the original rom set the board still works correctly. Any ideas?
3 L A T E S T R E P L I E S (Newest First)
anniel	Posted - 11/21/2017 : 09:03:21 quote: Originally posted by fusioncliffs I had a recent issue with an Intel 2764A it would read only "FF" data and would not verify. After much trial and error I found out the Toshiba TMM2764A protocol works perfectly ! Thank you for the info fusioncliffs. The only difference is WVCC="6.2V".
fusioncliffs	Posted - 11/21/2017 : 08:41:40 I had a recent issue with an Intel 2764A it would read only "FF" data and would not verify. After much trial and error I found out the Toshiba TMM2764A protocol works perfectly !
ZLM	Posted - 02/19/2017 : 00:18:56 Make sure the original chip checksum is same as the copied chip.

MCUmall EPROM BIOS Chip Burner Forum

Generated in 0.05 sec.