HI I am a tuner for remapping stock ECU's but very new to the BIOS chip tuning side of things.
I am wanting to reprogram a range of early model Hyundai ECU's which use the 27C512 chip set. Below is the information I have to date on the units (From various model ecu's they are fitted to)
Could I please be shown exactly which model universal programmer kit and adapters I need to enable me to do the reading / writing.
Additionally confirmation of what replacement chips I can use and where I can purchase them from. I researched what I found are some chips from various suppliers, but before i order anything I am wanting to make sure I both understand and order the correct parts.
Final question - is there a way I can do any form of tuning on a car with this system - setup some form of adapter onto a doner ECU to enable me to run the car, check logs, write straight to the ecu whilst connected to the car and then continue until I have completed the tune. Then do a final write and transfer the chip to the customers ECU permanently?
Thank you very much for your help - if there are any experienced people in Australia, I would love to talk to you and be more informed on this process.
I found most of my information from the following link which may provide more information on the ECU's I am wanting to retune
HI I am a tuner for remapping stock ECU's but very new to the BIOS chip tuning side of things.
I am wanting to reprogram a range of early model Hyundai ECU's which use the 27C512 chip set. Below is the information I have to date on the units (From various model ecu's they are fitted to)
Could I please be shown exactly which model universal programmer kit and adapters I need to enable me to do the reading / writing.
Additionally confirmation of what replacement chips I can use and where I can purchase them from. I researched what I found are some chips from various suppliers, but before i order anything I am wanting to make sure I both understand and order the correct parts.
Final question - is there a way I can do any form of tuning on a car with this system - setup some form of adapter onto a doner ECU to enable me to run the car, check logs, write straight to the ecu whilst connected to the car and then continue until I have completed the tune. Then do a final write and transfer the chip to the customers ECU permanently?
Thank you very much for your help - if there are any experienced people in Australia, I would love to talk to you and be more informed on this process.
I found most of my information from the following link which may provide more information on the ECU's I am wanting to retune
I have ordered the programming unit and am working on ordering the chips now.
In relation to the emulator can you provide more information on this, what do I need to purchase etc. I only a have vague idea of how to do this at this point in time.
Programming Kit for 27C512 chip
Forum Locked
Posted - 11/05/2023 : 08:43:43
