MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Willem PCB5.0c and ADP-054 Adapter - DIP40 27C1024		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

shas595

2 Posts
Posted - 12/01/2014 :  04:26:04  Show Profile
Hello all, glad to join!
I am trying to read and copy a 27C1024 EPROM.

I have used the Willem PCB5.0C many times before for 27C512 and 27C256 with no problem. I had to get the ADP-054 adapter to use 40 and 42pin DIP chips. But no matter what I do I cant get it to work. When I select the chip it tells me I need the 16BIT DIP 40 adapter. I am not sure if it is supposed to recognize the adapter on its own or not. Usually it shows a pic of the board and various settings on the left. Any thoughts? I am stuck and in a bind as I need to get these chips out the door.

Thanks!
Reply #1

ZLM

2945 Posts
Posted - 12/01/2014 :  20:06:19  Show Profile
The PCB5.0 does not check the adapter. So, the adapter in software should be resented always.
Go to Top of Page
Reply #2

shas595

2 Posts
Posted - 12/02/2014 :  09:26:33  Show Profile
So when I put the adapter on, what are the jumper settings supposed to be. I did the dip settings but the chips are not reading and blank checking.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000