| T O P I C R E V I E W |
| werejag |
Posted - 01/07/2008 : 01:43:47
27c160 i had a special zif socket version of the 16bit adaptor made and got the gq-3x
what am i doing wrong???
do i need any jumpers etc?
|
| 6 L A T E S T R E P L I E S (Newest First) |
| werejag |
Posted - 01/13/2008 : 11:12:11
good
is there a test process to make sure this programmer works 100% so i can be reassured and confident in it |
| ZLM |
Posted - 01/13/2008 : 09:20:56
This should not damage anything. It only causes wrong signals. |
| werejag |
Posted - 01/13/2008 : 04:57:36
found my error a piece of solder landed on 1k x10 resistor array pins 2-3-4 i hope nothing got damaged |
| werejag |
Posted - 01/08/2008 : 13:45:10
maybe these are bad |
| ZLM |
Posted - 01/08/2008 : 09:55:08
You need connect the three address jumper wires to the programmer: A19, A20, A21. |
| werejag |
Posted - 01/08/2008 : 02:51:27
nobody? |
