| T O P I C R E V I E W |
| gzk |
Posted - 01/12/2009 : 13:34:20
i can read the chip , don't know if the read is accurate , and i can't erase/flash the chip
when i rease it , and make a blank test , it failed .
the chip still contain the same data after erase it .
if i write on it, the data don't change , but i don't have any error message .
i use the zif dip 8 socket buy on the store , and latest soft veersion .
regards |
| 12 L A T E S T R E P L I E S (Newest First) |
| ZLM |
Posted - 01/24/2009 : 10:40:42
Your chip position seems OK. But makesure the chip pin 1 is at the top-left conor.
Checked software again and did not find anything wrong.
I need a chip for testing in order to find out why. |
| gzk |
Posted - 01/23/2009 : 13:58:16
* if i uninstall old version , after installing new version , the programmer doesn't woork .
windows cann't load the driver .
if you install the driver manually it doesn't work .
* i have reinstall back the last version (non beta) and after reinstall thhe version you gave me , and now the programmer is working .
but same problem with this chip :
h**p://img19.picoodle.com/img/img19/3/1/23/f_5P08C3m_1d3ef78.jpg
h**p://img26.picoodle.com/img/img26/3/1/23/f_DSC02983redm_15efed8.jpg
h**p://img26.picoodle.com/img/img26/3/1/23/f_DSC02987redm_1fbcb26.jpg |
| ZLM |
Posted - 01/22/2009 : 21:01:08
24C04 should be no problem.
Try following build for 5P08C3:
www.mcumall.com/download/TrueUSBWillem/GQUSBPrgRe4.0Beta2.exe
Uninstall the old version first.
Select 5P08C3 from software.
Let me know the exact error message if it fails. |
| gzk |
Posted - 01/22/2009 : 19:07:31
sorry not 94C04 BUT 24C04
that's i don't understand is i have already success to write one , and this time it's failed .
|
| ZLM |
Posted - 01/22/2009 : 18:14:49
94C04? it is not in the list. So, which device you selected for this chip?
I will post new beta software later for ST95P08 update for testing. |
| gzk |
Posted - 01/22/2009 : 10:27:29
HW GQ4X RE 1.10 SOFT 3.03
NOT LOCKED AT ALL
TRY ANOTHER 94C04 THIS MORNING
READ SUCESSFULL WRITE FAILED
|
| ZLM |
Posted - 01/21/2009 : 20:24:35
What is your programmer hardware version?
Select device AT25040 in software and click on "L" lock button to check if chip been locked. |
| gzk |
Posted - 01/21/2009 : 12:38:36
i don't know where you can buy one , but you can find it in edc15 ecu and other .
it's where the immo is stored , in some dash it contain the mileage .
100% sure now the adapter isn't the problem .
i have tried on the same 8 dip smd zif adaptor those serial eeprom
24C04 = success read & write (vag edc15immo)
24C02 = success read & write (old vag tdi immo ), pin 7 need to be ground to remove
write protection
2* 5P08C3 = sucess read , failed write (peugeot,citroen, renault edc15 immo ) , the datasheet said it have a write protect feature on one pin , tried to ground it or vcc it and nothing change still can't write on it .
datasheet :
www.datasheetcatalog.org/datasheet/SGSThomsonMicroelectronics/mXuwrvq.pdf" target="_blank">h p://www.datasheetcatalog.org/datasheet/SGSThomsonMicroelectronics/mXuwrvq.pdf
need your help |
| ZLM |
Posted - 01/19/2009 : 09:12:33
I need get one of this chip for testing.
Do you have any idea where can I find it? |
| gzk |
Posted - 01/18/2009 : 17:18:12
i have test all the speed unsucessfully
the chip is ok , i don't have other but the chip work , is an immo chip from a renault car .
|
| ZLM |
Posted - 01/14/2009 : 10:10:38
Try to use slowest speed?
Do you have second chip for testing? |
| gzk |
Posted - 01/14/2009 : 09:34:03
help !!!!!! |
