T O P I C R E V I E W |
nicotinetar |
Posted - 02/06/2009 : 20:22:44 Hi again me , i setup your sending 4.x program and i try 28f160 and 39vf160 but i have an error . At 28f error you know . at 39vf160 , when i try to read id this chip sometimes sst 39vf160 sometimes FFFFF some times sst not library ... i programmed 29lv160attc and 29w800 flash 8/16bit adaptor and i havent any mistake. read erase write and verify ok but 16 bit chips (28f and 39vf) i got errors. generally i can read but not erase and write. my programmer or adaptor have and hardware errors? |
8 L A T E S T R E P L I E S (Newest First) |
ZLM |
Posted - 02/25/2009 : 08:20:21 use Beta5B: www.mcumall.com/download/TrueUSBWillem/GQUSBPrgRe4.0Beta5B.exe
|
fox_el_negro |
Posted - 02/25/2009 : 00:03:13 and tanks a lot to take your time on answer!!! |
fox_el_negro |
Posted - 02/25/2009 : 00:02:00 ill send pictures very soon.
now were is the beta4 sofware? link is down |
ZLM |
Posted - 02/24/2009 : 23:57:22 can you take a close look picture on your chip in adapter with the programmer? So that I can get a close look of your configuration. |
fox_el_negro |
Posted - 02/24/2009 : 22:33:17 i have same problem cant program the intel te28f160 cb3. i only program one with the 39vf160 configuratio, then i try to program another chip and dont work check and recheck configurations everyting ok 3 6 jumper on 28fxx ok 19 20 21 ok coclusion programers have failures!!!!! |
nicotinetar |
Posted - 02/10/2009 : 18:01:17 Thank you , i ll try ... |
ZLM |
Posted - 02/07/2009 : 17:55:08 I got one TE28F160CB3 chip for testing. and I tested it on both GQ-3x and GQ-4X. Both are succeed without any problem on "TSOP48 16 bit adaper V2.0" So the sofrware Re4.0Beta3 has no problem.
www.mcumall.com/download/TrueUSBWillem/GQUSBPrgRe4.0Beta4.exe
Please check the Vcc jumper is on the 3.6 V position, the chip jumper on the 28FX00 position, A19,A20,A21 are connected.
I do not have 39vf160 for testing.
|
nicotinetar |
Posted - 02/07/2009 : 14:03:36 ZLM can you answer me ?
|