| T O P I C R E V I E W |
| sprit01 |
Posted - 03/03/2009 : 08:49:51
Image Insert:
50.12 KB
I figured out Options and Oscillator Select but don't have any idea of "Number Settings"
Can anybody knows what the number settings means?
Thank you |
| 4 L A T E S T R E P L I E S (Newest First) |
| sprit01 |
Posted - 03/05/2009 : 05:02:27
That wasn't problem it was from different portion..
When I change the portion of 3fe, the writer says "it's done". however, when I read it back from the chip, it wasn't burned
the data I want to put is "347c" |
| ZLM |
Posted - 03/03/2009 : 23:52:14
What is your means "it is not working"? Th ID is no part of yor code, you need to set it manually. |
| sprit01 |
Posted - 03/03/2009 : 11:59:34
12f675
I read the datasheet of 12f675..
According to this, Only the Least Significant 7 bits of the ID locations are used
So, I set "00 00 00 FF 00 FF 00 FF" on "00002000"
However, it's not working
am I wrong?
|
| ZLM |
Posted - 03/03/2009 : 11:34:58
You need to read the datasheet of your chip.
What is your chip part number? |
