| T O P I C R E V I E W |
| fox_el_negro |
Posted - 04/27/2009 : 23:31:31
this is the chip and some others like the mx29lv160, t28f160
Image Insert:
53.84 KB
the probles is wen i select the rigth configuration the programer dont recognice the chip
Image Insert:
62.04 KB
if i select another configuration then the id shows corect!!!
Image Insert:
65.86 KB
this is mi programer and configuration!!
Image Insert:
88.15 KB
whit the sst39vf160 configuration the chip reads ok butt cant erase or program the chip...
any idea?
PD: also have same problem whit mx29lv160
PD: and the intel chip t28f160 shows id ok and reads ok butt cant erase or program on it!!!!! |
| 5 L A T E S T R E P L I E S (Newest First) |
| ZLM |
Posted - 05/04/2009 : 00:03:58
Tested the MX29LV160 with following line:
Name="MX29LV160CB(16bit)",ID="C22249",Class="SST39VF1601",Category="FLASH",MFG="Macronix",Speed="5",Adapter="TSOP48 16 BIT Mode",Message="Set the adapter jumpers to VCC 3.6V and 29FX00 position."; |
| fox_el_negro |
Posted - 05/02/2009 : 22:44:02
works flawles on the amd chip butt the macronix, donot shows id, only wen i select the sst39lvxx it shows id |
| ZLM |
Posted - 04/29/2009 : 19:32:29
0 - For this particular chip AMD29LV160 you do not need buy another adapter.
1 - Yes. With this adapter line it should be able to work correctly.
2 - No. The USB Willem programmer JTAG currently is for CPLD device only. |
| fox_el_negro |
Posted - 04/29/2009 : 10:07:54
you are rigth !!!!!!!
i just check the correct adapter it shows all the brand tsop i cant program!!!!!
http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=3102
tanks!!!!!!!!
it jumps 3 questions!!
0- i need to buy the adapter?
1-whit the comand lines you gaveme i can program this chips? (intel t28fxx mx29lvxx am29lvxx) 8 bit chips or just the (amd)
2- can i use the usb willem programer to jtag a modem or fta device?
(this one is not important but i just want to ask)
tanks 4 u time!!!!!!!!!!!! |
| ZLM |
Posted - 04/28/2009 : 22:16:49
The adapter is not correct. The software for this chip is indicated 8 bit mode adapter. But you used 16 bit mode adapter.
To use 16 bit adapter, plese add following lines into devices.txt
Name="AM29LV160DB(16bit)",ID="012249",Class="SST39VF1601",Category="FLASH",MFG="AMD",Speed="5",Adapter="TSOP48 16 BIT Mode",Message="Set the adapter jumpers to VCC 3.6V and 29FX00 position.";
|
